Dodge Journey Remote Start

Dodge Journey Remote Start: How To Use, Enable Remote Starter

by Samuel Gitukui

How to Install a Remote Start System in Your Dodge Journey

Installing a remote start system in your Dodge Journey is an easy way to add convenience and security to your vehicle. With the right tools and some basic knowledge of automotive wiring, you can have a remote start system installed in no time. Here are the steps for installing a remote start system in your Dodge Journey:

1. Purchase the necessary components for installation. You will need a compatible remote starter kit, wiring harnesses, relays, fuses, and other electrical components as specified by the manufacturer’s instructions.

2. Disconnect the negative battery cable from your vehicle’s battery before beginning any work on its electrical systems to avoid short circuits or damage to sensitive electronic components.

3. Locate all of the necessary wires under your dashboard according to their color codes as indicated by the manufacturer’s instructions for connecting them correctly with their corresponding terminals on both ends of each wire harness connector plug-in point (elements).

4. Connect each wire from its corresponding terminal on one end of each wire harness connector plug-in point (elements) with its corresponding terminal at another end using crimp connectors or soldering iron depending upon what type of connection is required by that particular element/wire combination according to manufacturer’s instructions provided with a kit purchased earlier.

5. Install relays and fuses into appropriate locations as per the manufacturer’s instructions provided with the kit purchased earlier.

6. Test all connections made during the installation process using a multimeter or test light tool, ensuring that there are no shorts between any two wires connected if so then disconnect those two wires immediately & re-check again after making sure that they are not touching each other anymore before proceeding further ahead.

7. Reconnect the negative battery cable back onto the vehicle’s battery & turn the ignition key ON position without starting the engine yet, this will allow the power supply to flow through an entire circuit that was just created during the installation process & verify if everything works properly now or not – if yes then proceed towards next step otherwise go back & check all connections made once again until it starts working properly without any issues whatsoever.

8. Program remotes included within the starter kit according to the manufacturers’ instruction manual provided along with it while purchasing initially – this should be done carefully so as not to cause any problems later down the road when trying out different features available within these remotes like locking/unlocking doors remotely…

9. Finally install the hood pin switch (if applicable) onto the hood latch area near the front grille section which will prevent the engine from being started remotely unless the hood is closed securely first – this helps protect against theft attempts since thief won’t be able open up hood easily even after unlocking doors remotely via these remotes programmed earlier.

The Benefits of Having a Remote Start System in Your Dodge Journey

Having a remote start system in your Dodge Journey can provide you with several benefits. This system allows you to start your vehicle from the comfort of your home or office, eliminating the need to go outside and manually start it. It also provides convenience and security, as well as improved fuel efficiency.

  • Convenience is one of the main advantages of having a remote start system in your Dodge Journey. With this feature, you can easily warm up or cool down your car before getting into it without having to leave the house or office. This means that no matter what time of year it is, you will always be able to get into a comfortable temperature inside your vehicle when you are ready to drive away.
  • Security is another benefit that comes with having a remote starter installed in your Dodge Journey. By being able to remotely lock and unlock doors from afar, this feature helps protect against theft by making it more difficult for someone else to gain access to the car without permission from its owner first. Additionally, if someone does manage to break in while the engine is running remotely, they will not be able to drive away due since most systems require an additional key fob present inside the vehicle for ignition purposes before driving off can occur safely and legally on public roads.
  • Finally, installing a remote starter in your Dodge Journey can help improve fuel efficiency over time by allowing drivers more control over their engine’s idle speed when warming up or cooling down their vehicles before departure times each day. By reducing unnecessary idling periods during these processes, drivers can save money on gas costs while also helping reduce emissions levels released into our environment at large.

Overall, investing in an aftermarket remote starter for one’s Dodge Journey offers numerous advantages such as convenience, security, and improved fuel economy which all make owning this type of technology worthwhile for any driver looking to maximize their overall driving experience today.

Troubleshooting Common Issues with Dodge Journey Remote Starts

If you have a Dodge Journey with a remote start system, it can be very convenient to use, as with other car brands, like the Toyota Tacoma remote start function. However, like any other electronic device, there are times when the system may not work properly. Here are some common issues and solutions for troubleshooting your Dodge Journey remote start system.

1) The vehicle does not respond to the remote: This could be due to a weak or dead battery in the key fob or an issue with the antenna on the vehicle itself. To check if it is a battery issue, try replacing it with a new one and see if that solves the problem. If that doesn’t work, then you may need to take your car to an authorized service center for further diagnosis of any potential antenna issues.

2) The engine starts but won’t stay running: This could be caused by several different things such as low fuel levels in your tank or an issue with one of your sensors (such as oxygen sensor). Check all of these components first before taking them into service for further diagnosis and repair if necessary.

3) The engine starts but won’t turn off: This could be due to either an electrical short circuit somewhere in your wiring harness or possibly even something wrong with one of your relays/fuses/switches inside the car’s fuse box itself. Again, take it into service so they can diagnose what exactly is causing this problem and fix it accordingly if needed.

Exploring the Different Types of Aftermarket Remote Starts for the Dodge Journey

The Dodge Journey is a popular mid-size crossover SUV that offers plenty of features and amenities. One of the most sought-after features of this vehicle is a remote start system, which allows you to start your car from a distance. There are several different types of aftermarket remote starts available for the Dodge Journey, each with its own unique set of benefits and drawbacks. In this article, we will explore the different types of aftermarket remote starts available for the Dodge Journey so that you can make an informed decision when selecting one for your vehicle.

  • The first type of aftermarket remote start system available for the Dodge Journey is an OEM (Original Equipment Manufacturer) model. These systems are designed to be compatible with all factory components in your vehicle and offer reliable performance without any modifications or additional wiring required. They also come with detailed instructions on how to install them correctly so that they work properly every time you use them. The downside to these systems is that they tend to be more expensive than other options due to their higher-quality components and installation requirements.
  • Another option available is an add-on module system, which requires some minor modifications but still provides reliable performance without needing any additional wiring or programming changes made by a professional installer or technician. These systems typically come with detailed instructions on how to install them correctly as well as troubleshooting tips if something goes wrong during installation or operation afterwards. The downside here is that these modules may not always be compatible with all factory components in your vehicle, so it’s important to check compatibility before purchasing one of these systems if you want it installed professionally by someone who knows what they’re doing.
  • Finally, there are universal kits available that allow users more flexibility when installing their own aftermarket remote start system into their vehicles since no additional wiring or programming changes need to be made by professionals for them to work properly every time they’re used. However, these kits do require some technical knowledge to get everything working correctly since there isn’t any specific instruction manual included as there would be with OEM models or add-on modules mentioned above; therefore it’s important to research thoroughly before attempting installation yourself if you decide to go down this route instead.

In conclusion, there are several different types of aftermarket remote starts available for the Dodge Journey depending on what kind of performance level is desired as well budget constraints have been taken into consideration beforehand – from OEM models offering the highest quality parts at costlier prices through add-on modules requiring minor modifications yet still providing reliable results right down universal kits allowing users greater flexibility when installing themselves but requiring technical knowledge do so successfully – making sure choose right one first time around should ensure years trouble free enjoyment using such technology within the beloved ride.

Comparing OEM and Aftermarket Options for Installing a Remote Start on Your Dodge Journey

Installing a remote start on your Dodge Journey can be a great way to make your life easier and more convenient, just like the Kia Telluride and its remote start function. However, when it comes to choosing between OEM (Original Equipment Manufacturer) and aftermarket options, some important considerations should be taken into account.

When it comes to OEM options, the main advantage is that they are designed specifically for the Dodge Journey and will fit perfectly with its existing components. This means that installation is usually straightforward and hassle-free. Additionally, since these parts come from the same manufacturer as the vehicle itself, you can rest assured knowing that they have been tested for compatibility with all of its systems. The downside of this option is that it tends to be more expensive than aftermarket alternatives due to the higher production costs associated with producing parts specifically for one model of car.

On the other hand, aftermarket remote starts offer several advantages over their OEM counterparts. For starters, they tend to cost significantly less than OEM models due in part to lower production costs associated with mass-producing generic parts rather than customizing them for specific vehicles like Dodge Journeys do require. Furthermore, many aftermarket models come preprogrammed so installation is often simpler compared to an OEM model which may require additional programming or wiring work. Finally, some aftermarket models offer features not available on their OEM counterparts such as smartphone integration or voice control capabilities.

Ultimately, when deciding between an OEM or an Aftermarket Remote Start for your Dodge Journey, you should consider both cost and convenience factors before making a decision. While an Aftermarket Remote Start may save you money upfront, if installation proves difficult then this could end up costing you time in addition to money down the line. On the other hand, if you opt for an Original Equipment Manufacturer option then while it may cost more initially but installation will likely be much simpler resulting in less time spent getting everything set up correctly.

Tips for Choosing the Right Type of Remote Starter for Your Dodge Journey

1. Determine the type of remote starter you need: There are two main types of remote starters for Dodge Journey vehicles: one-way and two-way. A one-way system only allows you to start your vehicle from a distance, while a two-way system also allows you to receive confirmation that your vehicle has started successfully.

2. Consider the range of the remote starter: The range of a remote starter is an important factor when choosing which type is right for your Dodge Journey. Make sure to select a model with enough range so that it can reach wherever you plan on using it, such as across town or in another state if necessary.

3. Check compatibility with other systems: If your Dodge Journey already has an alarm system installed, make sure that any new remote starter will be compatible with it before making a purchase decision. Additionally, some models may require additional wiring or installation steps to work properly with certain features like power locks and windows; be sure to check these requirements before buying as well.

4. Look into additional features available: Many modern models come equipped with extra features such as keyless entry and trunk release capabilities, temperature control settings, and even GPS tracking options; consider what kind of extras would be useful for your particular needs before making any decisions about which model is best suited for you and your car’s needs.

Understanding How to Program and Use a New or Replacement Key Fob with your Vehicle’s Factory-Installed or Aftermarket-Installed Remote Starter

Programming and using a new or replacement key fob with your vehicle’s factory-installed or aftermarket-installed remote starter can be a daunting task. However, with the right instructions and knowledge, it is possible to successfully program and use your new key fob. This guide will provide step-by-step instructions on how to program and use a new or replacement key fob with your vehicle’s factory-installed or aftermarket-installed remote starter.

First, you must locate the programming port on the vehicle’s dashboard near the steering wheel column. Once located, you will need to connect an appropriate programming device (such as an OBDII scanner) to this port to access the car’s computer system for programming purposes.

Next, you must turn off all accessories for successful programming of your new key fob; this includes turning off any audio systems that may be playing music at high volumes as well as any other electronic devices that may interfere with communication between the car’s computer system and the programming device being used.

Once all accessories are turned off, you can begin by pressing down firmly on both buttons of your existing working remote starter until they light up simultaneously; this indicates that it is ready for reprogramming mode. Then press down firmly on both buttons of your new/replacement key fob until they light up simultaneously; this indicates that it is also ready for reprogramming mode. At this point, both remotes should be linked together via their respective receivers within seconds if done correctly – indicating successful pairing between them has been achieved.

Finally, test out whether everything has been programmed correctly by pressing either button from either remote – if everything works properly then congratulations. You have successfully programmed and used a new/replacement key fob with your vehicle’s factory-installed or aftermarket-installed remote starter.

Exploring Safety Features Available with Modern Automotive Remotes Starters, Including Those Designed Specifically For The Dodge Journey

Modern automotive remote starters are designed to provide drivers with convenience and safety, similar to the remote start feature on the Infiniti QX60. Remote starters for the Dodge Journey offer a variety of features that can help keep you and your vehicle secure.

  • One of the most important safety features available with modern remote starters is keyless entry. This feature allows you to unlock your car without having to use a physical key, making it much harder for someone to steal your vehicle or gain access without permission. Additionally, many models also come equipped with an alarm system that will sound if someone attempts to break into the car or tamper with it in any way.
  • Another important safety feature offered by modern remote starters is two-way communication technology. This technology allows you to communicate directly with your vehicle from up to one mile away using a smartphone app or other device, allowing you to check on its status even when you’re not nearby. You can also use this technology as an anti-theft measure; if someone attempts to start the engine without authorization, an alert will be sent directly from the car’s computer system so that you can take action quickly and prevent theft before it happens.
  • Finally, some models of Dodge Journey remote starter systems come equipped with panic buttons that allow drivers who feel threatened while in their vehicles (or those who have been locked out)to activate their alarms remotely to draw attention and scare off potential attackers or thieves.

In conclusion, modern automotive remotes starters offer a variety of features designed specifically for increased security and peace of mind while driving – including those available on Dodge Journey models – making them invaluable tools for keeping yourself safe on the road today.


1. What is the range of the Dodge Journey Remote Start?

The Dodge Journey Remote Start has a range of up to 200 feet.

2. Does the Dodge Journey Remote Start come with a warranty?

Yes, it comes with a one-year limited warranty from Mopar.

3. Is there an additional cost for the installation of the remote start system?

No, installation is included in the purchase price when you buy your vehicle from an authorized dealer or service center. However, if you choose to install it yourself, there may be additional costs associated with that process such as tools and supplies needed for installation and any applicable taxes or fees related to purchasing parts or services separately from your vehicle purchase agreement.

4. How do I activate my remote start system on my Dodge Journey?

You can activate your remote start system by pressing and holding down both buttons on your key fob simultaneously for three seconds until you hear two chirps indicating that it has been activated successfully.

5. Can I use my smartphone to control the remote start system on my Dodge Journey?

Yes, many models are compatible with smartphone apps that allow users to control their vehicles remotely via Bluetooth connection using their smartphones as well as other features like locking/unlocking doors and activating climate control settings remotely too.

6. Are there any safety features built into the remote start system on my Dodge Journey?

Yes, all models come equipped with several safety features including automatic shutoff after 10 minutes of continuous running time so that no one can accidentally leave their car running unattended; audible warnings when attempting to unlock doors while the engine is still running; panic mode which will sound alarm if triggered; and more.

7. Is there anything else I should know about using a remote starter in cold weather conditions?

Yes – always make sure that all windows are closed before activating your vehicle’s starter so that no cold air enters inside while warming up. Additionally, never leave children or pets unattended in vehicles equipped with remotes starters since they could become overheated quickly due to a lack of ventilation inside during warm-up periods.

8. Can I add accessories like heated seats or steering wheel controls onto my existing factory-installed remote starter kit for added convenience and comfort while driving during colder months?

Yes – many aftermarket companies offer kits specifically designed for adding these types of accessories onto existing factory-installed systems so check out what’s available online today.

Related Posts