How to Maximize Your Subaru WRX’s Towing Capacity
The Subaru WRX is a powerful and reliable vehicle, but it has limited tow capacity. If you need to tow something with your WRX, there are several steps you can take to maximize its tow capacity.
- First, make sure your vehicle is properly equipped for the job. Check that the hitch and wiring harness are rated for the weight of the load you plan on hauling. Make sure all of your lights are working properly and that your tires have enough tread depth and air pressure for safe operation.
- Second, reduce any unnecessary weight in the vehicle before attempting to tow anything. Remove any items from inside or outside of the car that isn’t necessary for driving or hauling such as extra cargo or roof racks. This will help reduce strain on your engine and transmission while also increasing fuel efficiency during long trips with a trailer attached.
- Third, use proper driving techniques when hauling a trailer with your WRX. Accelerate slowly when starting off from a stoplight or stop sign so as not to put too much strain on the engine and transmission at once; this will also help conserve fuel over time by avoiding sudden bursts of acceleration which can be inefficient in terms of fuel consumption. When going up hills, shift into lower gears earlier than normal so as not to overwork the engine; this will also help maintain control over speed while going downhill by allowing more control over braking power through gear selection rather than relying solely on brakes alone which can cause them to wear out faster due to excessive use during long trips with heavy loads attached behind them.
- Finally, make sure you’re aware of all applicable laws regarding trailer size limits in each state before attempting any long-distance trips with a trailer attached; some states may have restrictions based on total length or width which could affect how much weight you’re able to haul safely without risking fines or other penalties if caught violating these regulations while traveling through their jurisdiction(s). By following these tips, you’ll be able to maximize your Subaru WRX’s potential when it comes time for hauling heavier loads.
The Pros and Cons of Towing with a Subaru WRX
The Subaru WRX is a popular vehicle for towing, due to its all-wheel drive and powerful engine. However, there are both pros and cons to consider when deciding whether or not this car is the right choice for your needs. Also, if you want something a bit sportier, consider a custom Subaru STI build.
• The Subaru WRX has a powerful engine that can easily handle the weight of most trailers. This makes it an ideal choice for those who need to tow heavier loads.
• The all-wheel-drive system provides excellent traction and stability when driving on wet or slippery roads, making it safer than other vehicles when hauling a trailer.
• The car’s low center of gravity helps reduce swaying while driving, which can be dangerous with larger trailers.
• It has plenty of cargo space in the trunk and back seat area, allowing you to store items needed for your trip without having to use up valuable trailer space.
• Towing with a Subaru WRX can put extra strain on the engine and transmission (including the EJ257 crate engine), leading to increased wear and tear over time. This could result in costly repairs down the road if not properly maintained.
• The car’s suspension may not be able to handle heavier loads as well as other vehicles designed specifically for hauling trailers or boats.
• Fuel economy may suffer due to the added weight of the trailer, resulting in higher fuel costs over time if you plan on doing frequent trips with your vehicle/trailer combination.
Overall, while there are some potential drawbacks associated with using a Subaru WRX for hauling purposes, its power and stability make it an attractive option for those who need reliable performance from their vehicle while out on the road or trail with their trailer in tow.
What You Need to Know Before Towing with a Subaru WRX
Towing with a Subaru WRX can be an enjoyable and rewarding experience, but it is important to understand the limitations of your vehicle before you begin. Knowing the tow capacity of your WRX, as well as any other restrictions that may apply, will help ensure a safe and successful journey.
- The maximum tow capacity for a Subaru WRX is 1,500 pounds when properly equipped. This includes the weight of the trailer itself plus any cargo or passengers inside it. It is important to note that this number does not include any additional weight from accessories such as bike racks or cargo carriers. Additionally, if you are planning on using a tow bar or hitch system with your WRX, make sure that it is rated for at least 1,500 pounds and meets all applicable safety standards.
- When towing with a Subaru WRX it is also important to consider how much power your vehicle has available for pulling the trailer. The standard engine in most models produces 268 horsepower and 258 lb-ft of torque which should be sufficient for most light-duty trailers up to 1,500 pounds in weight; however, if you are planning on hauling heavier loads then you may need an upgraded engine option such as the 2.5L turbocharged engine which produces 310 horsepower and 290 lb-ft of torque instead.
- Finally, make sure that all tires on both vehicles are properly inflated before beginning your journey, and check them regularly throughout your trip to maintain optimal performance levels while driving with a trailer attached. Additionally, keep an eye out for signs of wear or damage on both vehicles’ brakes so that they can be serviced if necessary before attempting any long trips with heavy loads behind them.
By following these guidelines when preparing for a tow job with your Subaru WRX you can ensure that both yourself and others remain safe while enjoying all the benefits associated with owning one of these powerful vehicles. To learn more, check out our guide on how many miles can a Subaru Impreza last.
Understanding the Different Types of Hitches for Your Subaru WRX
When it comes to towing, the Subaru WRX is a great choice. It has plenty of power and torque for hauling light loads, and its all-wheel-drive system provides excellent traction. But before you can tow anything with your WRX, you need to make sure you have the right hitch installed. There are several different types of hitches available for the WRX, each designed for a specific purpose.
- The most common type of hitch used on the WRX is a Class I receiver hitch. This type of hitch is designed for light-duty applications such as bike racks or small cargo carriers. It has a maximum weight capacity of 2,000 pounds and can be used with either 1 ¼” or 2” receivers.
- For heavier loads, such as boat trailers or large cargo carriers, you will need a Class II receiver hitch. This type of hitch has a higher weight capacity (3,500 pounds) and requires either 1 ¼” or 2” receivers depending on your vehicle’s specifications.
- If you plan on towing something even heavier than that – like an RV trailer – then you will need to install a Class III receiver hitch on your WRX. This type of hitch has an even higher weight capacity (up to 8,000 pounds) and requires either 1 ¼” or 2” receivers depending on your vehicle’s specifications.
- Finally, if you plan on using any kind of fifth-wheel trailer then you will need to install a fifth-wheel rail kit in addition to the appropriate class III receiver hitch mentioned above for it works properly with your Subaru WRX. The rail kit allows the fifth-wheel trailer’s kingpin connection point to be mounted securely onto your vehicle’s frame so that it can safely tow heavy loads without damaging any components along the way.
No matter what kind of load you plan on hauling with your Subaru WRX, make sure that whatever type of Hitch system you choose meets all safety requirements set forth by both state laws and manufacturer guidelines. Doing so will ensure that both yourself and other drivers remain safe while out on the road.
Tips for Safely Towing with a Subaru WRX
1. Make sure your Subaru WRX is equipped with a tow hitch and the appropriate wiring harness for towing.
2. Check the owner’s manual for the maximum tow capacity of your vehicle, and do not exceed it.
3. Ensure that all of your trailer’s lights are functioning properly before you begin towing, including brake lights, turn signals, and running lights.
4. Make sure that the trailer is properly balanced by distributing its weight evenly between its axles and ensuring that it does not exceed its own weight limit or the maximum tow capacity of your Subaru WRX.
5. Use a high-quality tow hitch ball with an appropriate size for your trailer’s coupler; check both manufacturer specifications as well as local laws regarding ball size requirements before selecting one for use on public roads.
6. Securely attach all safety chains between the trailer and vehicle in case of accidental separation while driving; make sure they are crossed beneath the coupler so they will catch if necessary but will not drag on the ground while driving normally otherwise.
7. When backing up with a trailer attached, be aware that turning too sharply can cause jackknifing or other dangerous situations; practice maneuvering in an empty parking lot until you feel comfortable doing so in traffic or other areas where there may be pedestrians present.
8. Be aware of any additional strain placed on brakes when towing heavy loads; consider investing in an auxiliary braking system if necessary.
9. Always drive at safe speeds when towing a trailer, taking into account weather conditions, road conditions, visibility, traffic patterns, etc., as these can all affect how safely you can operate while hauling cargo behind you.